Specification of Feed Water for UF design

The amount of each component can be specified as shown below.

The suggested order is:

From the Feed Water tab, select the water type.
Enter the solid content properties (NTU, TSS, SDI) and the organic content (TOC).
Enter the temperature values and pH.
Adjust the pH value using ¨Adjust pH¨ button

Figure 1: Entry of UF specific feed composition

Notes:

WAVE limits the minimum temperature to 1°C and the maximum temperature in the Feed Water temperature entry fields to 40°C for UF.
WAVE does not have a correlation between the Turbidity, SDI and Total Suspended Solids (TSS) fields. The user is expected to put in the correct values for each field.

www.dupont.com/water/contact-us

All information set forth herein is for informational purposes only. This information is general information and may differ from that based on actual conditions. Customer is responsible for determining whether products and the information in this document are appropriate for Customer's use and for ensuring that Customer's workplace and disposal practices are in compliance with applicable laws and other government enactments. The product shown in this literature may not be available for sale and/or available in all geographies where DuPont is represented. The claims made may not have been approved for use in all countries. Please note that physical properties may vary depending on certain conditions and while operating conditions stated in this document are intended to lengthen product lifespan and/or improve product performance, it will ultimately depend on actual circumstances and is in no event a guarantee of achieving any specific results. DuPont assumes no obligation or liability for the information in this document. References to “DuPont” or the “Company” mean the DuPont legal entity selling the products to Customer unless otherwise expressly noted. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED. No freedom from infringement of any patent or trademark owned by DuPont or others is to be inferred.